AERIAL HD2
Model: WL-WN570HA1 EAN: 6955362063009
WN570HA1 is designed for long distance wireless network, making an ideal solution for small business , offices and the home with outdoor networking requirements
The High power outdoor Wi-Fi range extender pairs professional performance with human friendly design. Every craftmanship part makes mounting flexibly.
Comes with next Wi-Fi generation-802.11AC technology, WN570HA1 operates on both 2.4GHz and 5GHz up to 600Mbps. It lets you keep more devices connected at the same time with the dual bands, which is superior choice for seamless HD streaming, online gaming and other bandwidth-intensive tasks.
Independent high power amplifiers provide significantly increased output power, which is up to 5x transmission power. Except for Boosting transmission power, they also greatly increase the sensitivity of signal reception, keeping your mobile devices connecting to the router all the time.
With High Gain Dual-Polarized Antenna ,external RP-SMA connector, and High transmission power up to 600mW, the High power outdoor Wi-Fi range extender is power enough to expand Wi-Fi signal to further places.
Specifically designed to provide an effective solution for outdoor wireless networking applications. With its centralized management platform and high degree of flexibility, it is the ideal choice for providing point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage.
WN570HA1 has three convenient modes to make it even more flexible. As well as a Wi-Fi range extender, it can work as a wireless access point (AP), repeater or as a router.
The WN570HA1 has integrated Power over Ethernet (PoE) support, allowing this device to be installed in areas where power outlets are not readily available.
Secure access points to walls or poles with the mounting kits provided . It also feature a built-in mount, meaning that no tools are required for installation.
This industry-leading hardware ensures that WN570HA1 can be deployed in a wide variety of environments, withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F)
Easy Controller web-based management system for Windows, Mac OS X or Linux provides a suite of tools for IT managers, installers and network administrators to manage and maintain wireless networks.
WN570HA1
1 x 10/100Mbps WAN/LAN
1 x Reset button
1 x Power
1 x WAN/LAN
1 x WiFi
3 x Signal
DC24V / 0.5A Power over Ethernet ( Passive PoE)
input:100-240 Va.c. 50/60Hz
180mm x 50mm x 50mm ( L x W x H )
IEEE 802.11a/b/g/n/ac
IEEE 802.11ac: up to 433Mbps
IEEE 802.11n: up to 150Mbps
IEEE 802.11g: 54Mbps
IEEE 802.11b: 11Mbps
IEEE 802.11a: up to 54Mbps
2.4GHz,5GHz
WPA-PSK/ WPA2-PSK encryption
2 x 7dBi Detachable Omni Directional Antennas
1 x Wi-Fi AP/Range Extender/Router
2 x Detachable Omni Antenna
1 x RJ45 Networking Cable
1 x Power Adapter
1 x POE Converter
1 x Main body holder
2 x Cable ties
1 x Screw fittings
1 x Quick Guide
1.Please connect the wifi signal of wavlink device then use http://waplogin.link or http://192.168.30.1 to log in the management page.
2.Try to use different device like your phone or pc to log in the management page.
3.If you try to use your phone to log in the management page,please try to disable the mobile network.
4.If you try to use your pc to log in the management page,please make sure your pc is not connect to the router via Ethernet cable.
5.If you can't log in the management when the device is in AP Mode, please check the IP address arranged by the upstream router, then use this IP address to log in.
No,they are not waterproof,please keep them away from the water.
When there is no obstacle between the wavlink device and the target area,the 5g signal could reach about 300m and the 2.4g signal could reach about 100m for clients like phone.
Please try to avoid the obstacle.
The actual distance may depend on the environment.
Please be free to contact our support team if you meet any problem.
Yes,it is necessary to install the ground wire to avoid Static electricity and lightning strikes.
If you configure the wavlink device as repeater mode.
1.Please make sure you should enter the correct wifi password of the host router when you try to repeat the wifi signal.
2.Please make sure the dhcp of the host router is enabled.
3.Make sure the mac filter of the host router is not enabled.(Otherwise the wavlink device might be blocked)
If you configure the wavlink device as AP mode.
1.Please make sure the dhcp of the host router is enabled.
2.Make sure the mac filter of the host router is not enabled.(Otherwise the wavlink device might be blocked)
3.Please connect the pc to the modem/host router via Ethernet cable directly and check if you could get internet.(To rule out the problem of the modem/router)
No,this device could only form mesh system with the specific wavlink device which support everything mesh technology.For the devices which support everything technology,please refer to the link below:
Yes,our device could support ap/router/repeater mode.
In repeater mode,it could build a wireless connection with the starlink router.
In router/ap mode,you could connect the wavlink device to the starlink router via Ethernet cable.
Please press the reset button for 6s when the device is powered on.
No the device could not repeat the signal with captive portal.
Yes,it could be powered by the solar battery,just make sure you could provide DC48-54v for the device.
In repeater mode,the wavlink device could build a wireless connection with the host router,you need not connect the wavlink device to host router via Ethernet cable.
However you still need to connect the wavlink device to the poe box via Ethernet cable.It could only be powered by poe adapter/switch.
If the POE switch could support 802.3 at/af protocol,our device should work well with it.
Please configure the wavlink device as ap mode and connect it to the host router via Ethernet cable.Then you could control all the clients which connect to the wavlink device in the management page of the host router.
Get the Scoop First
Subscribe to our official website to receive exclusive first-hand news and stay up-to-date on our new product releases and promotions!
