AERIAL MAX
Model: WL-WN583A6
Simultaneously supports 2.4G and 5G wireless network connection with the transmission speeds of up to 2100Mbps. Select a better frequency band for your operation automatically and intelligently with higher speed and less interference.
With six high-gain antennas and amplifier, it establishes a extremely stable wireless connection and eliminates spotty coverage and dead zones, to cover every nook and cranny of your house.
Internal amplifier sends strong enough wireless signal to penetrate walls and other obstacle, providing a wall-to-wall network coverage. Therefore, 100% consistent Wi-Fi is always available at any room with no worries about blocking signal by wall.
The Gigabit Ethernet ports provide data transfer speeds 10x faster than standard Ethernet port. It allows you to connect Gaming console, Blu-ray player, Smart TV, streaming player and more.
With no need new wires or cables, just plug it into any power socket and easily extend your Wi-Fi by pushing the WPS button on your router and WN583A6.
Apart from repeater mode, WN583A6 can also work as a wireless access point (AP) or as a router.
MU-MIMO technology solves the problem of network signal congestion directly, it also strengthens the network capacity and security indirectly, so that people can access the Internet anytime, anywhere in your home at the same time.
With the Smart APP Management, you can easily and remotely control the light at the bottom of extender as you want.
Designs with number of vents around sides and bottom to deal with problem of prone to malfunction due to bad cooling. The Heat-dissipating design make better performance yet to come as it starts working.
WN583A6
1 x 10/100/1000Mbps WAN
1 x 10/100/1000Mbps LAN
1 x Smart Night Light button
1 x Pair / WPS button
1 x Power On/Off button
1 x Reset button
1 x Power
1 x LAN
1 x WAN
1 x WiFi
1 x Status
1 x Smart Night Light
DC5V / 2.5A
input:100-240 Va.c. 50/60Hz
159mm x 73.6mm x 43mm ( L x W x H )
IEEE 802.11a/b/g/n/ac
IEEE 802.11ac: up to 1733Mbps
IEEE 802.11n: up to 300Mbps
IEEE 802.11g: 54Mbps
IEEE 802.11b: 11Mbps
IEEE 802.11a: up to 54Mbps
2.4GHz, 5GHz
WPA-PSK/ WPA2-PSK encryption
6 x 3dBi Internal Omni Directional Antennas
1 x WiFi AP/Router/Range Extender
1 x RJ45 Networking Cable
1 x Quick Guide
Please log in the management page and go to Advanced > Led Control to manage the light status.
1.If you can't log in the management when the device is in AP Mode, please check the IP address arranged by the upstream router, use this IP address to log in.
2.Make sure you have connected to the Wi-Fi of the device.
3.Please try to clean the cache of the browser.
4.Try to log in the management page via another browser.
5.Try to log in the management page via other devices.
6.If you still meet some problem,please be free to contact our support team.
Please choose the mode that suits your needs.
In AP Mode, it extends network coverage by connecting to a router/switch via Ethernet cable.
In Repeater Mode, it extends network coverage wirelessly by connecting to an existing Wi-Fi network.
In Mesh Router Mode, it converts the wired connection from your ISP into a Wi-Fi signal and acts as the primary mesh node.
In Mesh Extender Mode, it extendes network coverage by wirelessly joining an existing mesh network.
Please reset the device by pressing the reset button for 6s when the device is powered on.
If you configure the wavlink device as repeater mode.
1.Please make sure you should enter the correct wifi password of the host router when you try to repeat the wifi signal.
2.Please make sure the dhcp of the host router is enabled.
3.Make sure the mac filter of the host router is not enabled.(Otherwise the wavlink device might be blocked)
If you configure the wavlink device as ap mode.
1.Please make sure the dhcp of the host router is enabled.
2.Make sure the mac filter of the host router is not enabled.(Otherwise the wavlink device might be blocked)
3.Please connect the pc to the modem/host router via Ethernet cable directly and check if you could get internet.(To rule out the problem of the modem/router)
Please press the reset button for 6s when the device is powered on.
No the device could not repeat the signal with captive portal.
Actually the device work as the wifi ranger extender,it could help help the user to get a larger wifi coverage.But it could not increase the internet speed from the host router.And the internet speed should be lower than the speed from the host router.
And there are some methods which might be helpful to help you get better performance in repeater mode.
1.Please try to adjust the position of the wavlink device.
And it is better to avoid too many obstacle like wall between the host router and wavlink device and try to avoid too many obstacle between the wavlink device and the target area.
2.Try to repeat the 5g signal of your host router,if there is no 5G signal.
If you still meet some problem,please be free to contact our support team.
Top
Get the Scoop First
Subscribe to our official website to receive exclusive first-hand news and stay up-to-date on our new product releases and promotions!
